Structural Calculations Enquiry Form Part 2 AAA – Draft – Form 2 – Structural Calculations Enquiry Form (Residential Home Improvements) V1.2 (1) Step 1 of 6 – Project Stage 0% Form completed Online Address of the property where the project will be undertaken?(Required)What county is the property located in?(Required)Choose your countyCarlowCavanClareCorkDonegalDublinGalway CityKerryKildareKilkennyLaoisLeitrimLimerickLongfordLouthMayoMeathMonaghanOffalyRoscommonSligoTipperaryWaterfordWestmeathWexfordWicklowWhich of the following best describes your current stage?(Required) I have sufficient information (drawings or clear scope) to proceed with a quotation for structural calculations I have discussed the works with my builder and can proceed based on that information I am not sure or not confident of the structural requirements required Please revert to your builder to understand and be confident in the structural requirements for your project before proceeding with this quotation form. Alternatively you could complete the form with your builder, who should be able to supply you with the necessary information required to provide a quotation. Thank you for your interest in this service and we look forward to providing you with a quotation when you have more information. Paste into which of the following best describes your current stage when the feasability service is brought onlin – I would like an engineer to assess the property and advise on the structural requirements before proceeding If you would like an engineer to assess the property before proceeding, we can carry out an initial review to define the structural requirements for your project. A visual inspection of the existing structure to understand its condition A review of any available drawings, sketches, or proposed works Identification of the structural elements likely to require design Clear guidance on the scope of structural calculations required This allows us to prepare an accurate quotation for the structural calculations based on the specific requirements of your project. The fee for this service will depend on the nature and extent of the proposed works. Request an engineer assessment Takes approximately 1–2 minutes to request. What type of property is your project for?(Required) Existing residential house or bungalow New residential house or bungalow Existing residential apartment or duplex New residential apartment or duplex Commercial property Residential properties include houses, bungalows, apartments and duplexes used as private dwellings. A house or bungalow includes detached, semi-detached and terraced properties. Apartments or duplexes are individual units within a building containing more than one dwelling. Based on your selection, a tailored response will be prepared. Bespoke quotations are available for: New residential houses or bungalows Residential apartments or duplex properties Commercial properties New houses, bungalows, apartments and duplex properties: Full plans must be submitted for a quotation to be provided Availability is subject to the size and complexity of the project We may not be able to offer this service for more complex projects Commercial properties: Full plans would be helpful if available, but are not essential Please provide a brief description of your proposed works and upload any available drawings, plans, sketches, photo’s or videos To receive a quotation: Provide a brief description of your proposed works Upload the relevant drawings, plans, sketches, photo’s or videos as outlined above What happens next: An engineer will review your submission If additional information is required, we will contact you You will receive a tailored response based on your project requirements Please provide a short description of your project Providing photos, drawings, or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Your sharing link for Google Drive, Dropbox, or WeTransfer. Example link – https://drive.google.com/file/d/1BxiMVs0XRA5nFMdKvBdBZjgmUUqptlbs74OgVE2upms/view?usp=sharingPlease upload any relevant photos / floor plans of the existing property to assist in understanding your project specifications Drop files here or Select files Accepted file types: jpg, gif, png, pdf, Max. file size: 50 MB, Max. files: 5. Please upload full plans of the new property design. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, Max. file size: 50 MB, Max. files: 5. Have any structural changes been made to the property (for example, walls removed, openings formed, or extensions added)?(Required) Yes No Not sure Please provide a description of any changes that have been made to the property, or any works that you think may have been undertaken but are not sure about.Are you aware of any structural issues with the above works?(Required) Yes No Not sure Please provide details of any structural issues that you are either aware of, or are not sure are isses, for the above works Providing photos, drawings, or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Your sharing link for Google Drive, Dropbox, or WeTransfer. Example link – https://drive.google.com/file/d/1BxiMVs0XRA5nFMdKvBdBZjgmUUqptlbs74OgVE2upms/view?usp=sharingPlease upload any relevant photos, sketches, drawings or documents for previous property changes/alterations. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, Max. file size: 50 MB, Max. files: 5. Project OverviewWhat type of works do you require structural calculations for? Please choose all relevant options. A. Extensions Front extension Side extension Rear extension Wrap around extension Porch extension Included in this section is the removal/alteration of any external walls that are part of the extension works.B. Internal Structural Changes Removal/alteration of load bearing interior wall (as part of extension works) Removal/alteration of load bearing wall (standalone works) C. External Structural Changes Removal/alteration of external wall (standalone works) D. Conversions Attic conversion Garage conversion E. Other Other (please specify) A. Extension DetailsWhat type of foundations currently exist at the property? Strip foundation Raft foundation Pile foundation Other I don’t know If you know for certain let us know the choice, however if you are not certain please check “I don’t know.”Please provide details of the other type of foundationThis field is hidden when viewing the formWhat is the approximate area of the extension in square metres? 2m² – 10m² 11m² – 30m² – 31m² – 50m² 51m² – 100m² 100m² plus This field is hidden when viewing the formWhat type of foundation will be required to support the extension? Strip foundation Raft foundation Pile foundation Other Please provide details of the other type of foundationWhat will the exterior walls be constructed from? Single walls – 1 block deep Cavity wall – 2 blocks deep Insulated concrete form (ICF) Timber frame with exterior masonry wall Steel frame with exterior masonry wall Timber frame with exterior cladding Steel frame with exterior cladding Timber frame with non structural cladding Steel frame with non structural cladding Other Please provide details of the other type of exterior wall constructionWhat will the total thickness of the newly constructed exterior walls be in mm?The thickness should exclude all non structural finishes such as plaster, drylining etcPlease provide details of the retaining wallsWhat type of roof will the extension have? Flat roof Pitched roof Other What other type of roof will the extension have?What will the internal ceiling look like in your proposed extension? Flat ceiling Vaulted ceiling Will the roof contain sky lights? Yes No How many skylights will be in the roof? 1 2 3 plus Will any external walls for the existing house be opened, altered, or removed to connect to the new extension?(Required) Yes – creating a new opening Yes – widening an existing door/window opening Yes – removing most or all of an external wall No – access to the extension will be through an existing opening Unsure Examples include converting a window to a door, widening an existing opening, or removing part of a wall to create an open-plan connection.Approximately how wide will the new opening be? Less than 1m 1m – 2m 2m – 4m 4m+ Unsure What type of wall is on the LEFT side of the new opening? Single walls – 1 block deep Cavity wall – 2 blocks deep Insulated concrete form (ICF) Timber frame with exterior masonry wall Steel frame with exterior masonry wall Timber frame with exterior cladding Steel frame with exterior cladding Timber frame with non structural cladding Steel frame with non structural cladding Other What type of "other" wall is on the LEFT hand side of the opening?Do you know the width of the cavity for the wall to the LEFT of the opening? Yes I know the width of the cavity No I don’t know the width of the cavity What is the width of the cavity for the wall to the LEFT of the opening?Please provide the dimensions in mm.This field is hidden when viewing the formWhat is the width of the FULL wall construction for the wall to the LEFT of the opening?This dimension should include all materials such as plaster, blockwork, render etc. Please provide the dimensions in mm.Does the wall to the LEFT of the opening support floor joists? Yes it supports floor joists No it does not support floor joists What type of wall is on the RIGHT side of the new opening? Single walls – 1 block deep Cavity wall – 2 blocks deep Insulated concrete form (ICF) Timber frame with exterior masonry wall Steel frame with exterior masonry wall Timber frame with exterior cladding Steel frame with exterior cladding Timber frame with non structural cladding Steel frame with non structural cladding Other What type of "other" wall is on the RIGHT hand side of the opening?Do you know the width of the cavity for the wall to the RIGHT of the opening? Yes I know the width of the cavity No I don’t know the width of the cavity What is the width of the cavity for the wall to the RIGHT of the opening??Please provide the dimensions in mm.This field is hidden when viewing the formWhat is the width of the FULL wall construction for the wall to the RIGHT of the opening?This dimension should include all materials such as plaster, blockwork, render etc. Please provide the dimensions in mm.Does the wall to the RIGHT of the opening support floor joists? Yes it supports floor joists No it does not support floor joists Please upload dimensioned section drawings of the LEFT or RIGHT wall sections to be removed. Provide drawings of both walls if they do not have the same dimensions. Upload DRAWINGS of wall sections to the LEFT and RIGHT of the wall to be removed Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 10. If you have these available please provide a picture or sketch with dimensions to demonstrate the portion of wall you would like removed and the portion of walls you would be happy to remain in place for support.Upload PHOTOS of the existing property showing both internally and externally the wall that is to be removed Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Are there any trees within 15 metres of the existing property structure? Yes No Please provide a description of the trees and their proximity to the house.It would be very helpful to know the types of trees, their approximate distance from the property, and which (if any) will be removed. If you don’t know the type/s of tree please provide photo’s for identification, complete with a reference to the location. Providing photos, plans, drawings, or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the “Link to files” field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Please upload photos, drawings or videos of the trees Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 10. Images showing the proximity of the tree/s to the property would be very helpful.Link to files (Google Drive / Dropbox / WeTransfer) Videos showing the proximity of the tree/s to the property would be very helpful. Providing photos, plans, drawings, or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the “Link to files” field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Which of the following can you provide for the proposed extension? I have a dimensioned description of the extension I have dimensioned plans for the extension I have dimensioned sketches for the extension Please tick all relevant answers.Please provide a short dimensioned description of your planned extension/s.Please upload your photos, pictures, plans, drawings and/or sketches of your planned extension here. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Floor plans that estate agents use when properties are been sold can provide us with some information.Link to files (Google Drive / Dropbox / WeTransfer) B. Internal Structural Change DetailWhat type of construction is the interior load bearing wall you are planning to alter/remove (as part of extension works)?(Required) Concrete block or brick construction Stone construction Timber construction Not sure Other What type of "other"construction is the interior load bearing wall you are planning to alter/remove?What is the TOTAL THICKNESS of the interior load bearing wall you are planning to alter/remove (as part of extension works)? (mm)The thickness should include all finishes (plaster, blocks, bricks etc). Dimensions should be provided in mm.How WIDE will the new opening be in the interior load bearing wall you are planning to alter/remove (as part of extension works)?(mm)Dimensions should be provided in mm.How many floors / levels are there above the load bearing interior wall you are planning to remove (as part of extension works)? One floor above the proposed wall to be removed Two floors above the proposed wall to be removed Three floors above the proposed wall to be removed What type of construction are the walls directly above the load bearing wall to be removed (as part of extension works)? Solid walls (masonry/block) Hollow walls (timber stud) Would you be open to retaining a portion of the load bearing wall that is to be removed (as part of the extension works)?(Required) Yes some of the wall could be retained No I do not want any of the wall retained I’m not sure Retaining a portion of the existing wall (such as for returns) can provide support for bearing weight, simplify the design, and reduce installation costs. It would be very helpful if you could provide a picture or sketch with dimensions to demonstrate the portion of wall you would like removed and the portion of walls you would be happy to remain in place for support. Providing photos, drawings, plans, sketches or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Which of the following can you provide for the proposed load bearing interior wall (as part of extension works)? I have a dimensioned description of the proposed changes to the load bearing wall I have dimensioned plans for the proposed changes to the load bearing wall I have dimensioned sketches for the proposed changes to the load bearing wall I have photos of the the load bearing wall Please tick all relevant answers.Please provide a short description of the load bearing wall/s you are planning to alter/remove (as part of extension works).Please upload your photos, pictures, plans and/or sketches of your planned load bearing interior wall removal (as part of extension works). Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Link to files (Google Drive / Dropbox / WeTransfer) B. Internal Structural Change DetailsRemoval/alteration of load-bearing wall (no extension)What type of construction is the load bearing interior wall you are planning to alter/remove?(Required) Concrete block or brick Construction Stone construction Timber Construction Not sure Other Removal/alteration of load-bearing wall (as part of an extension)What type of "other"construction is the interior load bearing wall you are planning to alter/remove?What is the TOTAL THICKNESS of the load bearing interior wall you are planning to alter/remove?The thickness should include all finishes (plaster, blocks, bricks etc). Please provide dimensions in mm.How WIDE will the new opening be in the load bearing interior wall?Please provide dimensions in mm.How many floors / levels are there above the interior load bearing wall you are planning to remove? One floor above the proposed wall to be removed Two floors above the proposed wall to be removed Three floors above the proposed wall to be removed What type of construction are the walls directly above the load bearing wall to be removed? Solid walls (masonry/block) Hollow walls (timber stud) Would you be open to retaining a portion of the load bearing wall that is to be removed? Yes some of the wall could be retained No I do not want any of the wall retained I’m not sure Retaining a portion of the existing wall (such as for returns) can provide support for bearing weight, simplify the design, and reduce installation costs. It would be very helpful if you could provide a picture or sketch with dimensions to demonstrate the portion of wall you would like removed and the portion of walls you would be happy to remain in place for support. Providing photos, drawings, plans, sketches or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Which of the following can you provide for the changes to the load bearing interior wall? I have a dimensioned description of the proposed changes to the load bearing wall I have dimensioned plans for the proposed changes to the load bearing wall I have dimensioned sketches for the proposed changes to the load bearing wall I have photos of the the load bearing wall Please tick all relevant answers.Please provide a short description of the load bearing interior wall/s you are planning to alter/remove.Please provide dimensions in mmPlease upload your photos, pictures, plans and/or sketches of your planned load bearing interior wall removal. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Link to files (Google Drive / Dropbox / WeTransfer) C. External Structural Change DetailsAlteration/removal of external wall (no extension)How wide will the new opening in the exterior wall be? (mm)What type of construction is the exterior wall you are planning to alter/remove to the LEFT of where the opening will be? Single walls – 1 block deep Cavity wall – 2 blocks deep Insulated concrete form (ICF) Timber frame with exterior masonry wall Steel frame with exterior masonry wall Timber frame with exterior cladding Steel frame with exterior cladding Timber frame with non structural cladding Steel frame with non structural cladding Other Provide details as if standing outside the property looking at the new opening.What type of "other" construction is the exterior wall to the LEFT of the opening?What is the total thickness of the exterior wall to the LEFT of the planned opening? (mm)The thickness should include all finishes (plaster, blocks, bricks etc). (As viewed from outside the property).Do you know the WIDTH of the cavity for the wall to the LEFT of the opening? (mm) Yes I know the width of the cavity No I don’t know the width of the cavity (As viewed from outside the property).What is the width of the cavity to the LEFT of the planned opening? (mm)The thickness should include all finishes (plaster, blocks, bricks etc). (As viewed from outside the property).What type of construction is the exterior wall you are planning to alter/remove to the RIGHT of where the opening will be? Single walls – 1 block deep Cavity wall – 2 blocks deep Insulated concrete form (ICF) Timber frame with exterior masonry wall Steel frame with exterior masonry wall Timber frame with exterior cladding Steel frame with exterior cladding Timber frame with non structural cladding Steel frame with non structural cladding Other Provide details as if standing outside the property looking at the new opening.What type of "other" construction is the exterior wall to the RIGHT of where the opening will be?What is the total thickness of the exterior wall to the RIGHT of the planned opening? (mm)The thickness should include all finishes (plaster, blocks, bricks etc). (As viewed from outside the property).Do you know the WIDTH of the cavity for the wall to the RIGHT of the opening? (mm) Yes I know the width of the cavity No I don’t know the width of the cavity (As viewed from outside the property).What is the width of the cavity to the RIGHT of the planned opening? (mm)The thickness should include all finishes (plaster, blocks, bricks etc). (As viewed from outside the property).How many floors / levels are there above the exterior wall you are planning to remove? One floor above the proposed wall to be removed Two floors above the proposed wall to be removed Three floors above the proposed wall to be removed Which of the following can you provide for the changes to the load bearing exterior wall? I have a dimensioned description of the proposed changes to the load bearing wall I have dimensioned plans for the proposed changes to the load bearing wall I have dimensioned sketches for the proposed changes to the load bearing wall I have photos of the the load bearing wall Please tick all relevant answers.Please provide a short dimensioned description of the exterior walls you are planning to alter/remove.Please tick all relevant answers Providing photos, drawings, plans, sketches or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Please upload your photos, pictures, plans and/or sketches of your planned exterior wall removal. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Floor plans that estate agents use when properties are been sold can provide us with some information.Link to files (Google Drive / Dropbox / WeTransfer) D. Conversion DetailsAttic conversionWhat type of construction are the EXTERIOR walls that support the current attic structure? Single walls – 1 block deep Cavity wall – 2 blocks deep Insulated concrete form (ICF) Timber frame with exterior masonry wall Steel frame with exterior masonry wall Timber frame with exterior cladding Steel frame with exterior cladding Timber frame with non structural cladding Steel frame with non structural cladding Other What type of "other" EXTERIOR walls support the current attic structure?Do you know if any of the INTERIOR walls support the current attic structure.(Required) The interior walls support the attic Some of the interior walls support the attic Non of the interior walls support the attic Not sure What type of INTERIOR structural walls support the current attic structure.(Required) Masonry construction Stud wall construction Not sure What is the construction of the existing attic structure? Truss/Engineered roof Traditional cut roof Not sure Structural Elements Of A Roof The diagram below illustrates each of the structural elements described. Please refer to it when completing the fields in this section. Ridgeboard — A non-structural timber at the apex of the roof. Rafters are nailed to either side of it as a fixing point only; it does not carry load. Ridge Beam — A structural beam at the apex that carries the load of the rafters. Required where there are no ceiling joists to act as ties (e.g. vaulted or cathedral ceilings) and must be properly supported at each end. Purlins — Horizontal beams running perpendicular to the rafters along the length of the roof, providing mid-span support to the rafters. They sit beneath the rafters and are supported by internal walls, struts, or gable walls, effectively reducing the rafter span. Rafters — The inclined timber members spanning from the wall plate up to the ridge, carrying the roof covering (tiles, slates, etc.). Rafter centres are measured horizontally from the centre of one rafter to the centre of the next, typically 400mm or 600mm. Ceiling Joists — Horizontal timbers spanning between the two opposing wall plates at ceiling level. They tie the feet of the rafters together to prevent the walls spreading outward, and carry the ceiling finish below. Ceiling joist centres are measured horizontally from centre to centre, typically 400mm or 600mm. What elements are present in the current roof structure? Ridge board Ridge beam Purlins Rafter/joist ties Rafters Ceiling joists More than one item can be checkedWhat WIDTH is the ridge board? (mm) What HEIGHT is the ridge board? (mm) What WIDTH is the ridge beam? (mm) What HEIGHT is the ridge beam? (mm) What WIDTH are the purlins? (mm) What HEIGHT are the purlins? (mm) What WIDTH are the ceiling joist ties? (mm) What HEIGHT are the ceiling joist ties? (mm) What WIDTH are the rafters? (mm) What HEIGHT are the rafters? (mm) What are the rafter CENTRES? (mm) What WIDTH are the ceiling joists? (mm) What HEIGHT are the ceiling joists? (mm) What are the ceiling joists CENTRES? (mm) What roof coverings are in place at the property Natural slates Cement tiles Clay tiles Composite roof tiles Zinc/Metal clad roof Other Provide details of other roof tiles in use.Approximately how wide apart are the front and back walls of the property?Please provide your response in metres.Approximately how wide apart are the two side walls of the property?Please provide your response in metres.What is the approximate pitch of the roof? 0 – 15 degrees 16 – 30 degrees 31 – 45 degrees Do you know the height from the eves to the ridge? Yes No What is the length from the eaves to the ridge in mm?What shape willl the proposed attic floor be after conversion? Square Rectangular T-shape L-shape Other What "other" shape will the proposed attic floor be after conversion?Will the roof contain sky/roof lights? Yes No Will the roof contain dormer window/s? Yes No Not sure Do you have any of the following styles of dormer windows in your roof Large dormer flat roof Dog house Shed (rectangular) Do you have or want solar panels on the roof? Yes No Not sure Do you have a description, sketch or drawing (all with dimensions) of the proposed attic conversion? I have a dimensions, description, sketch and/or drawings for the attic conversion I don’t have a description, plans or sketches of the proposed attic conversion If you don’t have any plans or sketches, please revert to your builder to obtain this information in order to complete the form. Please provide a short description of your planned attic conversion.Please include dimensions in mm Providing photos, drawings, plans, sketches or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Please upload your photos, pictures, plans and/or sketches of your planned attic conversion here. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. The sketch should include where possible any dormer types and locations, existing roof structure/roof and floor layout and location of the stairs for access to the conversion. Please provide photos showing the whole front, back and sides of the propery. Floor plans that estate agents use when properties are being sold can also provide us with some information.Link to files (Google Drive / Dropbox / WeTransfer) D. Conversion DetailsGarage conversionsDo have a description, sketch or drawing of the proposed garage conversion? I have a description of the garage conversion I have plans / sketch / drawings of the garage conversion Please provide a short description of your garage conversion.Please tick all relevant answers Providing photos, drawings, plans, sketches or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Please upload your photos, pictures, plans and/or sketches you may have of your garage conversion here. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Floor plans that estate agents use when properties are been sold can provide us with some information.Link to files (Google Drive / Dropbox / WeTransfer) E. Other developmentsDo have a description, sketch or drawing of your other proposed development? I have a description of my other development I have plans / sketch / drawings for my other development Please tick all relevant answersPlease provide a short description of your other development. Providing photos, drawings, plans, sketches or videos You may upload photos or small files directly using the upload field in this form. If you have large files or videos, please upload them to a file sharing service such as Google Drive, Dropbox, or WeTransfer. Once uploaded, copy the sharing link and paste it into the field below. Please ensure the link permissions allow access (for example: “Anyone with the link can view”). Providing clear photos, drawings, or short videos can help our engineers better understand your project and assess your requirements. Please upload your photos, pictures, plans and/or sketches you may have of your other development here. Drop files here or Select files Accepted file types: jpg, gif, png, pdf, , Max. file size: 50 MB, Max. files: 5. Floor plans that estate agents use when properties are been sold can provide us with some information.Link to files (Google Drive / Dropbox / WeTransfer) Optional: Engineer review Before we prepare your quotation, an engineer can review your project and provide guidance on the proposed approach. Review of your proposed works and drawings Identification of structural considerations Guidance on the appropriate structural approach Would you like an engineer to review your project before we prepare your quotation? Yes – request an engineer review No – continue with quotation Often selected where drawings are still being developed or structural changes are involved. Property eircode(Required)What is your role in the project?(Required)Home-Owner (with good building experience)Home-Owner (with little or no building experience)Building ContractorArchitectural ConsultantProperty DeveloperOtherAre you a self-builder?(Required) Yes No Is planning permission required for this development?(Required) Yes No Not Sure If you can please provide any relevant planning permission numbers.If you have the numbers they can help us in understanding the development.What is the current status of your project?(Required) Not started and obtaining quotations Nearing project start date Project started on site Awaiting calculations from existing engineer Other What is your project start date? MM slash DD slash YYYY What is your target requirement date for calculations? MM slash DD slash YYYY OtherPlease provide the other details for your projects current status. Who is completing this enquiry form? Client / Person that requires the service Third party on behalf of a client Whose email address will we be sending the quotation to? Clients email address Third party email address Third parties include building contractors, construction companies, developers, etc.Your name First Last Clients name First Last Your phone contact(Required)Clients phone contact(Required)This is required in the event that we need to clarify information with the client, and also to follow up on the quote and discuss any booking.Your email address(Required) Enter Email Confirm Email The quote will be sent to this email address. Data Privacy Notice The information and files you submit through this form, including photographs, drawings, and project descriptions, will be used by Property Health Check Ltd solely for the purpose of preparing your structural calculations quotation. Your data will be stored securely and will not be shared with third parties except where required to deliver this service. For full details of how we handle your personal data, your rights, and our retention policy, please see our Privacy Policy. Consent(Required) I agree to the privacy policy.I give consent to use this information to send additional emails and communication as described in our Privacy Policy Important Notice – Accuracy of Information Submitted The quotation provided by Property Health Check Ltd is based solely on the information, dimensions, photographs, drawings, and descriptions submitted through this form. Property Health Check Ltd accepts no responsibility for errors, omissions, delays, or additional costs arising from information that is inaccurate, incomplete, or incorrectly submitted by the applicant or any third party completing this form on their behalf. It is the responsibility of the person submitting this form to ensure that all details are correct and reflect the actual scope and conditions of the proposed works. Where estimates or approximations are provided, the final quotation may be subject to revision upon receipt of accurate information. Submission of this form does not constitute a contract or commitment to proceed. Property Health Check Ltd reserves the right to revise or withdraw any quotation where submitted information is found to be materially inaccurate or incomplete. By submitting this form, you confirm that the information provided is accurate and complete to the best of your knowledge. Declaration(Required) I confirm the details I have provided are accurate and understand that my quotation will be based on this information.
